Saffier Se37 Lounge

/0 Comments/in /by

For Saffier Yachts in IJmuiden we made a design of a 37ft daysailer. Dean and Dennis Hennevanger of Saffier Yachts developed the concept and we created the design. The Saffier Se37 Lounge is a remarkable yacht, because the cockpit and interior are totally different as other yachts. The idea is a fast and good sailing daysailer, where the sailor can comfortable sail or lounge in the cockpit as well as in the interior. For this reason the steering wheels are in front of the cockpit and behind the wheels we created a large U-settee and sundeck. The interior is open and has comfortable seats. More information of design 175 is on the SYD-website or on the website of Saffier Yachts. The Yacht magazine published an article on the website.

175_saffierse37_interior_aft3

TEN won ChinaCup 2016 in IRC-C division

/0 Comments/in /by

During the last ChinaCup ‘Team Yomovo’ won the ChinaCup2016 in the IRC-C division. The first race from Hong Kong to Shenzhen was canceled because there was no wind and also the short upwind/downwind races on the Friday were canceled. On Saturday, three races were sailed in 20kts wind and on Sunday two races in 10kts wind. Team Yomovo, skippered by Martin Hingst scored three 1st places and two 2nd places. Team Yomovo is sailing in TEN (design 147).

Aluminium Casco Orion 49 / Explorer ready

/0 Comments/in , /by

The boatyard Alubouw in Franeker has finished the second aluminium casco of the Orion 49. The hull, keel and sailplan are the same as the first Orion 49 / Cruiser (design 169). The deck, cabin, deckhouse, cockpit, transom and interior are different form the 1st Orion 49.

Aluminium casco Orion 49/Explorer (design 173) almost ready, August 2016

/0 Comments/in /by

The boatyard Alubouw in Franeker is finishing the second aluminium casco of the Orion 49/II. The hull, keel and sailplan are the same as the first Orion. The deck, cabin, deckhouse, cockpit, transom and interior are different form the 1st Orion 49. Medio september will the yacht transported to Jurjen Mulder Jacht en Scheepsbetimmering, where the boat will be finished.

Update, June 2016

/0 Comments/in /by

At the moment we’re working on the RSC1900 (design 172). The RSC1900 is a 19.00 meter aluminium sailing yacht. The client came with the concept and made the interior design. We’re doing the naval architecture and the whole construction. The RSC1900 is designed for the MED and has a furling mast, a captive winch for the mainsheet, a selftacking jib and  a dinghy storage. This summer the client will choose the boatyard, which is going to build this yacht.

For a dutch boatyard we’re designing a new polyester 37ft daysailer (design 175). The first drawings are ready and next month the yard will start to build it. As soon as the yard will publish the pictures, we will show you this spectacular concept.

Orion 49 / Cruiser (design 169) on transport

/0 Comments/in /by

At the end of May, the hull of the Orion 49 / Cruiser was transported to the carpentry shop. Alubouw Franeker is now working on the second hull, which will be ready mid July.

Charlotte for sale

/0 Comments/in /by

In 2010, the Charlotte was launched and since then the yacht sailed hundreds of miles in Europe. The yacht is built in composite by Pijnen Jachtbouw in Tholen and is a nice compromise between classic lines and modern structure and lines beneath the waterline. Most of the miles were sailed solo and the Charlotte is very easy to handle.

The owner asks 140.000 euro for the 41ft Charlotte.

The Charlotte 41 has a classic appearance, but is furthermore totally high-tech. It is a safe, comfortable and fast sailing yacht, designed by Satellite Yacht Design. The hull and rigging are calculated and designed with the most modern stability and prediction programs. The hull of the Charlotte 41 exists of a standard sandwich construction with a ‘core cell’ foam core and a glass/epoxy laminate on the inside and outside.

Further information: https://www.yacht-design.nl/designs/charlotte-41/. Please contact us for visiting or further information.

 

Update, April 2016

/0 Comments/in , , /by

A long time we didn’t post any news on the website. And there was so much news, that we didn’t have time to make some articles. In the first months of 2016 we finished the designs of the two orion’s, which are built in Franeker. We also started the design of a 19 meter aluminium sailing yacht and also finished the design of a 6.20 m composite daysailer for the Chineese lakes. At least we have to design a composite 36ft and 38ft sailing yacht for a dutch client.

Project 169-Orion49 / The first aluminium casco is almost fininshed. At the moment the daggerboard and rudders are placed and the yard is finishing the last details in the hull and deck.

Project 170-DF20 / In China are the moulds for a 20ft daysailer almost finished. This summer the prototype will be launched.

Project 173-Orion 49 / The hull of the second Orion will be built at the moment. The differences between the Orion’s are the transom, cockpit, deck, deckhouse and interior. Hull, keel, rudders and rigging are the same for the two boats.

Project 172-RS1900 / We’re designing a 19.00m aluminium sailing yacht for a dutch client. The client delivered the sketches of the exterior in a 2d Rhino-file and designed the interior in 3d himself. We designed and calculated the exterior, construction, keel, rudder and rigging.

Project 175 and 176 / At the moment we’re making the first sketches for the 36ft and 38ft composite daysailers.